Yamaha PDM-4210E - Manual (Page 54)

53
ENGLISH
OTHER FUNCTIONS
A2 / NICAM / Sound Multiplex
• The CH I / II button is only useful for NICAM and sound multiplex signals.
Otherwise pressing this button will have no effect.
BILINGUAL / DUAL sound broadcast
When bilingual program is received, sound mode display appears in yellow as shown on
right.
Press the CH I / II button to select the sound to be heard.
Each time the button is pressed, I, II or
▼ (force mono) appear cyclically on the screen.
When receiving NICAM signals, NICAM display will appear as below.
8
NICAM [II]
[I] [II]
NICAM [I] NICAM [II]
Sound multiplex signal received
Select I, II or (force mono) to hear the CH I, CH II or MONO broadcast respectively.
NICAM signal received
Yellow
Yellow Yellow
Yellow
Green
Green
NICAM
Sound multiplex signal received
Select or (force mono) to hear the STEREO or MONO broadcast respectively.
NICAM signal received
Red Green
Red Green
8
STEREO sound broadcast
When a stereo program is received, the sound mode display will appear in red, and you can
press the CH I / II button to select either stereo or mono sound.
Each time the button is pressed, or ▼ (force mono)appear cyclically on the screen.
When receiving NICAM signals, the NICAM display will appear as below.
Monaural sound broadcast
When a monaural program is received, the sound mode display will appear in green.
You can press the CH I / II button to swith the sound mode between monaural and forced
mono (sounds are identical).
Each time the button is pressed, or
▼ (force mono) appear cyclically on the screen.
NOTE
• If the sound signal is not strong enough for quality reception, press the CH I / II button until ▼ appears on the screen to receive a clear mono sound.
• If the sound signal has hiss noise or the plasma monitor keeps switching between stereo and mono mode due to signal condition, press the
CH I / II button until ▼ appears on the screen to receive a clear mono sound.
8
OPERATING INSTRUCTIONS (continued)