Yamaha PDM-4210E - Manual (Page 22)

21
ENGLISH
LANGUAGE MENU
Picture
Audio
Timer
Function
Setup
Language
Select
OK Set Language
English
Français
Deutsch
Español
Italiano
Norsk
Svenska
Select Return Exit
OK
MENU
Select a language using the ▼ ▲ SELECT buttons and press the OK button.
OTHER FEATURES
Automatic Store
Approximately 1 sec. after adjustment is completed, the adjustments will be recorded as shown in the table below.
• The previously recorded items will be lost.
• The signal mode can be identified by the horizontal/vertical sync
frequency and the sync signal polarity. Different signals for which
all the elements are the same or similar will be handled as the
same signal.
Menu Display Registration condition
Picture Contrast For every input function, 1 setting
is registered.
Brightness
Colour
Hue
Picture Enhancement
Colour temperature
Colour Temp. Adjust
R Amplitude For every Colour Temperature, 1
setting is registered.
G Amplitude
B Amplitude
R Cut Off
G Cut Off
B Cut Off
Audio Audio Mode 1 setting is registered.
Treble For every Audio Mode, 1 setting is
registered.
Bass
Balance 1 setting is registered.
SRS TruBass
For every Audio Mode, 1 setting is
registered.
Matrix Surround
Perfect Volume
Menu Display Registration condition
Function Screen Saver 1 setting is registered.
Screen Wipe (not registered)
Black Side Panel (not registered)
Panel Life 1 setting is registered.
Mode Display
ID Number
Inverse
Standby White
Gamma
Setup Auto Adjust (not registered)
Horizontal Position For every signal Mode, 1 setting is
registered. (Only for RGB2)
Vertical Position
Horizontal Clock
Clock Phase
Input Level 1 setting is registered.
Frequency Display
WVGA Type
Vertical Filter
Frequency Mode
Language 1 setting is registered.
OPERATING INSTRUCTIONS (continued)