Yamaha BLASTER YFS200N User Manual

Page 108

a. Spark plug gap

When installing the spark plug, always clean the

gasket surface and use a new gasket. Wipe off

any grime from the threads and tighten to the

specified torque.

EBU00288

Air filter cleaning

NOTE

There is a check hose at the bottom of the air fil-

ter case. If dust or water collects in this hose,

empty the hose and clean the air filter element

and air filter case.

1. Check hose

1. Remove the seat.

2. Remove the air filter case cover.

8-8

Tightening torque:

Spark plug:

25 Nm (2.5 m•kg, 18 ft•lb)