Wachsmuth & Krogmann KingKraft ZJ4116QA - Manual (Page 11)

LIST OF MAIN PARTS
Before attempting to use, familiarize yourself with all the operating features and
safety requirements of your drill press.
1. Belt tension lever - The belt tension lever is used to release or tighten belt
tension.
2. Belt tension knob - Belt tension knobs on both sides of the pulley housing lock
the belt tension lever in place.
3. Depth gauge - A depth gauge is located between the pulley housing and
operating handles to aid drilling at desired depth.
4. Operating handles - Operating handles raise and lower the chuck and bit during
the drilling operation.
5. Motor - Equipped with an industrial duty, induction motor for long lasting, smooth
performance.
6. Pulley and belts - Nine spindle speeds can be obtained by adjusting the position
of the belts on the pulleys to allow drilling of a variety of materials (i.e. wood, plastic
or metal).
7. Safety switch and switch key – Your drill press has an easy access power
switch. To lock in the OFF position, remove the switch key. Place the key in a
location inaccessible to children and others not qualified to use the tool.
8. Pulley - The drill press has three pulleys to obtain 9 different speeds.
9. Chuck guard - A transparent chuck guard will help protect hands from the
rotating drill bit during the drilling operation.
10. Worktable - For added versatility, the worktable can be tilted. The slotted
worktable and base allows easy application of clamping devices.
10