Winegard TRAVELNET TN2300-DV - Manual (Page 7)

Ver. 1.6
8/3/2009 - 7 -
• From Configuration Mode, press
.
To disable Call Barring (default setting):
• From Configuration Mode, press
.
Call Restrict (TN2300-DV SERIES-500C only)
Call Restrict allows you to determine which calls may or may not be placed
through your TN2300-DV SERIES. When the Call Restrict level is set to Use
Table, the Call Restrict feature checks outgoing calls against user-defined permit
and deny tables to determine whether to permit or deny the outgoing call. Each
table (permit and deny) may contain up to ten entries.
To set the Call Restrict level:
• From Configuration Mode, press <1, 2,
3, or 4> ,where <1, 2, 3, or 4> are as follows:
1 = No Restriction (default setting)
2 = Use Table
3 = Emergency Only (only emergency calls permitted; all other calls denied)
4 = Clear Table
To set the Call Restrict table entries:
• From Configuration Mode, press <0 or
1> , where the options are as follows:
<0 or 1> = Table mode (0 = Deny table; 1 = Permit table)
= Table entry
= 10-digit phone number for the Call Restrict entry
(For example, if you wanted to add 555-123-4567 as the third entry in your Deny
table, you would
press
)
Dial Tone After Remote Disconnect (DTARD)
To allow you to place another call when a connection has been terminated
remotely (when the other party has hung up the phone), you may elect to have
the TN2300-DV SERIES return to dial tone automatically. If you elect not to
enable DTARD, you will need to hang up the phone before placing another call.
To enable Dial Tone After Remote Disconnect (to return to dial tone):
• From Configuration Mode, press .