Welch Allyn SCANTEAM 6920 - Manual (Page 19)

14 SCANTEAM 6920 User’s Guide
Displaying a Status Check
1. Turn off power to the host PC.
2. Set MSR DIP switch position 8 to OFF.
3. Turn on power to the host PC.
4. Type the following keys: UD.
5. Turn off power to the host PC.
6. Set MSR DIP switch position 8 to ON.
7. Reapply power to the host PC.
Status Check Display Example:
rem transmission speed xx char./sec
rem keyboard type xx
rem activation char. disable [or x]
≈ ≈
rem track x enable
rem begin key enable. begin keys is x
rem end key enable, end keys is x
rem beeper setup enable
rem [ur] return to default setup
rem [ul] list how to using function key
rem prefix / suffix at ...
Status check displays the following information:
Transmission speed xx = current value.
Keyboard type xx = current type.
Activa tion cha ra cter disa ble or x = a ctua l cha ra cter when ena bled.
Track x = current track enabled.
Begin key x = current prefix (preamble), up to five characters.
End key x= current suffix (postamble), up to five characters.
PrefixĂ/ĂSuffix positionĂ= beforeĂ/Ăafter all or each track(s).