VocoPro KJ-7808RV - Manual (Page 24)

22
Master Cueing
Master Cueing will cue the MASTER
OUTPUT to the headphones. This is
commonly used to isolate the audio
signal to the headphones. Master
cueing makes it possible to practice
when “audible” music is not permitted
i.e. late night practicing at home. To
MASTER CUE, make sure the CUE/
MASTER button is set to MASTER
and adjust the CUE LEVEL control to
a desired volume level. Note: When
master cueing, pressing any channels individual Cue button will not affect output to the
headphones as those buttons only work when channel cueing.
Operations
Crossfading between sources
The crossfader allows you to “mix”
or crossfade between two channels
while toggling between corresponding
video outputs. To do this, you need
to first ASSIGN the two channels to
your CROSSFADER. On each side of
the CROSSFADER, there is an ASSIGN button. The LEFT ASSIGN button can assign either
CHANNEL 1 or 2, while the RIGHT ASSIGN button can assign either CHANNEL 2 or 3. Once you
have your desired channels assigned, move their respective CHANNEL FADERS to an audible
level, and slide the CROSSFADER back and forth to crossfade.
Note: If you assign channel 2 on both sides, the crossfader will not crossfade.
Recording a Performance or Mix
To RECORD a mix or performance, connect a line-level patch cable from the RECORD OUT to
the AUDIO IN of a recording device.
RECORD
L
R
CASSETTE/DAT/
CD BURNER
INCREASE DECREASE
OFF ON