VocoPro KJ-7808RV - Manual (Page 16)

14
1. AC INPUT - This is the terminal for the AC power cable. Carefully insert the AC power cable here. The AC
power cable should fit firm into housing.
2. BOOTH OUT - These RCA jacks are for sending audio to BOOTH/MONITOR speakers. The output level to the
BOOTH/MONITOR speakers is controlled via the BOOTH fader. Connect an appropriate cable from these jacks
to your BOOTH/MONITOR speakers. Note: If your Booth/Monitor speakers do not have a built-in amplifier, you
will need to connect them to a dedicated amplifier to power them.
3. BALANCED (XLR) MASTER OUT - These BALANCED MASTER OUT jacks are for balanced XLR cables. These
jacks provide connection to a power amplifier. Note: If your amplifier has 1/4” input jacks, you will need 1/4” to
XLR cables or adaptors. Some amplifiers offer multiple connection options, including RCA “unbalanced” input.
See number 4.
4. UNBALANCED (RCA) MASTER OUT - These UNBALANCED MASTER OUT jacks are for
standard RCA cables. These jacks provide connection to a power amplifier as well. Note: If your amplifier has
1/4” input jacks, you will need 1/4” to RCA cables or adaptors.
5. RECORD OUT - These L/R RCA jacks jacks bypass the MASTER OUTS for connection to any CD burner,
cassette, or DAT recorder to record your mix. Ideal for the mobile DJ/KJ that wants to offer their customer a
recording at the end of their performance.
6. AV OUT - In addition to the MASTER and BOOTH outs, this mixed RCA L/R output gives you an additional
option for connection of your mix to external components. Use in conjuction with the AV OUT LEVEL on the
Master Panel to control the signal level.
7. AV INPUT 1, 2, 3 (audio) - These STEREO INPUT jacks are for connecting external components to the
KJ-7808RV. You can connect any L/R RCA cables to these inputs, but there are dedicated inputs for CD or
PHONO/LINE to provide optimal sound quality. Adjust the STEREO CHANNEL SOURCE toggle on the middle
panel of the KJ-7808RV accordingly.
8. CD INPUT 1, 2, 3 - Use these dedicated inputs for CD players as source music with RCA L/R cables. Adjust
the STEREO CHANNEL SOURCE toggle on the middle panel of the KJ-7808RV accordingly.
9. PHONO 1, 2, 3/LINE INPUT - Use these STEREO INPUT jacks to connect turntables using L/R RCA. With
PHONO 1 and 2, you also have the option of selecting line input, using #9 in conjunction with these jacks. Adjust
the STEREO CHANNEL SOURCE toggle on the middle panel of the KJ-7808RV accordingly.