VDO Dayton CD 2327 G User Manual

Page 24

Continue programming your SWRC’s buttons

to the pre-defined as much as possible with

the same steps.

For those buttons that you do not need,

please disabled them by selecting “-DIS-

ABLE-” and press-and-hold the unwanted

buttons for more than 2 seconds.

Important Note: In the case that you did not

disable the unwanted SWRC buttons, due to the

complexity of the programming to cater to most

types of SWRC, the headunit may recognise an

unwanted key-press on your SWRC as one of

the valid input.
9. Continue to select “-DISABLE-” and repeat

the process to disable all unwanted buttons.

10. To exit the programming mode and SAVE all

settings, short-press the

SAM

AST

button.

11. To exit the programming mode and DISCARD

all settings, short-press the

PWR

MUTE

button.

These pre-defined functions emulate the buttons

on the front panel:

Volume-

Volume+

Source

Right

Left

Down

Mute

-Disable-

Please refer to the section on "FRONT PANEL

AND REMOTE CONTROL" for buttons' function-

alities.

