Uniden CXAI 5198 - Manual (Page 9)

G E T T I N G S T A R T E D [ 8 ] w w w . u n i d e n . c o m
C. Install the rechargeable battery pack into the handset
1) Press down on the handset battery case cover (use the finger
indention for a better grip) and slide the cover downward to
remove.
2) Plug the battery pack connector (red & black wires) into the
jack inside the battery compartment. (The connector notches
fit into the grooves of the jack only one way.) Match the wire
colors to the polarity label in the battery compartment,
connect the battery and listen for a click to insure connection.
3) Make sure you have a good connection by slightly pulling on
the battery wires. If the connection is secure, the battery jack
will remain in place.
4) Place the battery case cover back on the handset and slide it
upwards until it clicks into place.
Use only the Uniden
(BT-905) rechargeable
battery pack supplied
with your cordless
telephone.
note
G
ETT
ING
ST
AR
TED