Uniden CXAI 5198 - Manual (Page 11)

G E T T I N G S T A R T E D [ 1 0 ] w w w . u n i d e n . c o m
E. Mount the base unit on a wall (if desired)
Standard wall plate mounting
This phone can be mounted on any standard wall plate.
1) Remove the wall mount adapter from the
base and snap it into the notches on the
bottom of the base.
2) Plug the AC adapter to the DC IN 9V jack.
3) Wrap the AC adapter cord inside the
molded wiring channel as shown.
4) Plug the AC adapter into a standard 120V
AC wall outlet.
5) Plug the telephone line cord into the TEL
LINE jack.
6) Wrap the cord inside the molded wiring
channel as shown.
7) Plug the telephone line cord into the
telephone outlet.
8) Align the mounting slots on the base with
the mounting posts on the wall.
Then push in and down until the phone is
firmly seated.
9) On the base unit, pull the handset retainer
out of the slot. Rotate it clockwise 180 degrees.
10)Flip the retainer from front to back. Slide it back
into the slot so that the lip of the retainer is up
and the oval is down. The retainer holds the
handset in place.
G
ETT
ING
ST
AR
TED