beautypg.com

Specifications – United States Stove Company 6041TP User Manual

Page 2

background image

2

USSC

NOTE: YOUR UNIT MUST BE INSTALLED BY A

QUALIFIED INSTALLER, such as an NFI

(National

Fireplace Institute)

Certified Specialist

You’ve purchased one of America’s Finest Multi-fuel Burning Heaters. By heating

with fuels such as corn and pellets, you’re helping CONSERVE AMERICA’S ENERGY!

We strongly suggest installing smoke detectors in your home if not already installed.

Initial burn off may cause slight smoke and odor the first few hours of operation.

Perform initial burn outside if possible

SPECIFICATIONS

United States Stove Company

reserves the right to alter products, specifications and price without

notice.

Safety Tested & Listed to ASTM- E 1509, (UM) 84-HUD, by OMNI Test Laboratories, Inc., Portland,
Oregon USA

BTU output will vary, depending on the brand, type and quality of fuel and the moisture content. Consult your

dealer for best results.

Based on post 1982 home construction, requiring 35 BTU/Hr per Sq. Ft.

Remember, this heater should not be used as the only source of heat in the house.

Power outages and neglect of periodic maintenance will result in a total loss of heat.

Heat Input

(as tested)

45,000 BTU/HR

Heat Output

(as tested)

35,100 BTU/HR

Heating Capacity

1,000-2,000 Sq. Ft 

Fuel Storage Capacity

60 Lbs.

Width

29 in./737mm

Height

6041TP/6041HF

31 in./787mm

6041I

24 in./610mm

Depth

28 in./711mm

This manual is related to the following products: