Uniden UPBX 416 - Manual (Page 28)

Extension Memory Dial Input/Out
Each extension can store 10 personal memory dials by using the Station Memory Dial
Operation:
To INPUT Extension Memory Dial No.
1. Lift the handset
2. Press to input Memory Dial.
3. Press the two digit Memory Dial No. e.g.
4. Press telephone number; e.g. 1 2 3 4 5 6 7 8 9.
5. Press to exit this feature.
6. Replace the handset.
To DIAL OUT:
1. Lift the handset
2. Press - to get into this feature.
3. Press the two digit Memory Dial No. e.g.
To CANCEL:
1. Lift the handset
2. Press - to input Memory Dial.
3. Press the two digit Memory Dial No. e.g.
4. Press to exit this feature.
5. Replace the handset.
System Memory Dial Input/Out
This feature allows you fast and convenient dialling of telephone numbers stored in the
system. All extensions have access to a common pool of up to 40 numbers. The registration
of system memory dial could be done at the attendant number 200.
Operation:
To INPUT System Memory Dial No.
1. Lift the handset connected to Ext.200-the dial tone is heard in the receiver.
2. Press - to input memory dial.
3. Press the two digit Memory Dial No. e.g.
4. Press telephone number; e.g. 1 2 3 4 5 6 7 8 9.
5. Press - to exit this feature.
6. Replace the handset.
MEMORY DIAL
#
6 4
#
6 4
6 1
6 4
2 3 4 9 1 0 ) )
0 9 0 0
) )
0 5
6 4
) ) 0 9 0 0
# 6 4 4 9 1 0 Telephone No.
) )
0 5 ) )
0 9 0 0
0 5 0 9 0 0
) )
# 6 4 0 9 0 0 Telephone No.
) )
6 1
) )
0 9 0 0
23