Quantum DLTSageTM Tape Security PX500 Series - Manual (Page 4)

PX500 Series DLTSage™ Tape Security Quick Start Guide
4
Enable/Disable Secure Key
for Drives
0
Refer to figure 5 for information on Enable/Disable Secure
Key for Drives .
Figure 5 Enable/Disable Secure
Key for Drives
The Secure Key can only be used with tape drives that are
Secure Key capable. This section lists the tape drives in the
library that are Secure Key capable. A checkmark in the
Secure Key
column indicates a Secure Key is enabled for
the tape drive.
1 The Secure Key can be enabled or disabled for all tape
drives by clicking the corresponding radio button.
2 Click the Secure Key check box for individual tape
drives to enable/disable Secure Key for a tape drive.
3 Click Update to activate the changes.
Modify Secure Key for
Library
0
Refer to figure 6 for information on Modify Secure Key for
Library .
Figure 6 Modify Secure Key for
Library
To modify the Secure Key used by the library:
N OTE : The system must be offline to Enable/Disable
Secure Key setting for drives.
1 Select the Secure Key name from the list of available
names.
2 Click Update.
Assign Secure Key to
Cartridge
0
Refer to figure 7 for information on Assign Secure Key to
Cartridge
.
Figure 7 Assign Secure Key to
Cartridge
Click Find to list all secured cartridges and their assigned
Secure Key names.
To assign a Secure Key to a cartridge:
1 Enter the barcode of the cartridge. Separate multiple
barcodes with either spaces or commas.
2 Select a Secure Key name from the list of available
names.
3 Selecting Remove will remove the association between
the cartridge and a Secure Key name in the cartridge
database.
4 Click Update to accept the changes.
Create Secure Key Name/
Secure Key Pair
0
Refer to figure 8 for information on Create Secure Key
Name/Secure Key Pair .
N OTE : Selecting None to will cause the library to
NOT use a Secure Key.
N OTE : The system must be offline to modify a
Secure Key.