Radio Shack FRS - Manual (Page 7)

7
This connection automatically disconnects
the internal speaker and the
PTT (push to
talk) button.
Or, you can connect a mono earphone (avail-
able at your local RadioShack store) into the
SPK jack and use the PTT button as usual.
USING THE BELT CLIP
To use the supplied belt
clip, slide it down onto the
tab at the back of the radio
until it clicks. To remove
the clip, pull up on the mid-
dle tab of the clip and slide
the clip upward.
USING A HAND STRAP
To attach an optional
hand strap to the ra-
dio, thread the hand
strap’s small loop
through the holes next
to
PTT . You might
need to use a small
screwdriver or a
straightened paper clip to do this. Then pull
the strap’s large loop through the small loop.
To attach an optional pager chain to the ra-
dio, simply snap the chain’s small loop into
one of the holes next to
PTT .
21-1822.fm Page 7 Friday, March 10, 2000 10:39 AM