Radio Shack CT-600 - Manual (Page 58)

58
1. Enter the phone number of the party you wish
to call.
2. Hold down until the phone briefly dis-
plays CARD CALL and the selected card, then
displays WAIT FOR TONE, THEN PRESS
‘OK’ .
Note: If no calling card is stored in memory, the
phone displays
NO CALLING CARD SELECT-
ED and does not complete the call.
3. When you hear a tone or voice prompt, press
or . The phone might display WAIT
FOR TONE, THEN PRESS ‘OK’ again.
If you get another tone or voice prompt, press
again, then continue with the call as you
normally would.
Note: This procedure might not apply to all calling
card options. For more information, look at the back
of your calling card or contact your long distance
carrier.
You can also make a calling card call during a PIN
call. See “PIN Code Dialing” on Page 62.
SEND
OK SEND
SEND
17-1105.fm Page 58 Wednesday, July 21, 1999 11:06 AM