Radio Shack CT-600 - Manual (Page 53)

53
Notes:
• If you select silent service or vibrate, the phone
displays SILENT when there is no call in
progress and when you are not using another
function.
• To use the Ring+Vibra or Vibrate settings, you
must use the supplied vibrating battery (Ra-
dioShack Cat. No. 23-1024).
RINGING TONE
Follow these steps to view the current ring tone set-
ting and select from six different tones that your
phone can sound when it receives a call.
1. Press then or until you see PHONE
SETTINGS . Press .
2. Press or until you see RINGING TONE
and the current setting. Press if you want to
change it. Or, press or to exit the
menu.
3. Press or to move the pointer to the ringing
tone you want to use. As you scroll through the
settings, the phone rings so you can hear each
tone. Press
to select and store the setting.
MENU
OK
OK
CLR END
OK
17-1105.fm Page 53 Wednesday, July 21, 1999 11:06 AM