Irh610, Introduction – Niles Audio Infrared Sensor Expansion Hub IRH610 User Manual
Page 2
Introduction
The IRH610 is an infrared sensor expansion hub that mounts in a structured-
wiring cabinet or on a wall. It connects between the output of an infrared
sensor and a Niles main system unit.
Niles IR repeating systems are made up of three building blocks:
• IR Main System Unit—Models MSU140, MSU250, MSU480 and MSU440Z.
• IR Sensors/Keypads—Models WS100, TS100, MS100, MS200, CS100,
MVC100IR and the IntelliPad
®
.
• IR Flashers—Models MF1, MF1VF, MF2, MF2VF and the IRB1.
An IR repeater system with multiple sensors connected directly to the main sys-
tem requires a large number of connecting wires, This creates an unsightly and
often inconvenient installation and increases the potential for connection errors.
The Niles IRH610 eliminates such problems. Simply run a single category
5 cable from the main system unit to the expansion hub, and then connect
each of the IR sensors to the distribution hub.
TABLE OF CONTENTS
Introduction
1
Features and
Benefits
2
Installation
Considerations
2
Installation
3
Specifications
6
Contents
6
I
N
F
R
A
R
E
D
S
E
N
S
O
R
E
X
P
A
N
S
I
O
N
H
U
B
IRH610
Infrared Sensor
Expansion Hub
DS00351ACN_IRH610.qxp 3/8/04 10:51 AM Page 3