Nortel Networks Application Server 53r 5300 00 User Manual

Page 47

background image

Configuring the NTP, Syslog, and Audit Daemon settings

47

Disable the serial console redirection by selecting option 3 and
proceed to step 12.

OR

Enable system console redirection by selecting option 1.

The system displays the following prompt:

Please select the speed of the serial port:

11

From the list of port speed options, select the speed that best
matches the speed used on the equipment attached to the
RS-232 serial cable.

The system displays the following prompt:

Enter Region (1-62):

12

Enter the number that best represents the geographic region of
the server.

Not all regions from the first level will have second-level choices
defined.

If a second-level choice is defined for the geographic region, the
system displays the following prompt:

Enter Timezone Selection for Region (0, 1-):

13

Enter the number that best represents the time zone of the
server.

The system displays a summary of the current configuration
settings.

14

Do one the following:

Type Y to confirm the configuration settings and continue with
the Linux installation process.

OR

Type N to repeat the previous configuration steps and make
changes.

--End--

Configuring the NTP, Syslog, and Audit Daemon settings

This phase of the Linux operating system installation configures the
following items:

Network Time Protocol settings

Syslog configuration

Audit Daemon configuration

Application Server 5300

Nortel AS 5300 Installation

NN42040-300

01.04

4 November 2008

Copyright © 2007-2008 Nortel Networks

.