Nikon D60 - Manual (Page 138)

126
Menu
Gu
ide
Basic Camera Settings: The Setup Menu
File No. Sequence
Choose how the camera names files.
C
File Numbering
If the current folder is numbered 999 and contains 999 photographs or a photograph numbered
9999, the shutter release will be disabled and the message Card is full will be displayed in the
monitor and ful will blink in the viewfinder. Select Reset for File no. sequence and format the
memory card or insert another memory card in the camera.
Clean Image Sensor
The camera automatically removes dust from the low-pass filter protecting the image
sensor. See “Caring for the Optical Low-Pass Filter” (A
160) for details.
Mirror Lock-Up
Lock the mirror in the up position when inspecting or cleaning the low-pass filter that
protects the camera image sensor. See “Cleaning the Low-Pass Filter Manually” (A 162)
for details.
Firmware Version
View the current camera firmware version.
Off (default setting)
File numbering is reset to 0001 when a new folder is created, the memory card is formatted, or
a new memory card is inserted.
On
File numbering continues by adding one to the last number used after a new folder is created,
the memory card is formatted, or a new memory card is inserted. The last file number is stored
even when file numbering is switched from On to Off, and file numbering continues by
adding one to the last number stored the next time file numbering is set to On. If a
photograph is taken when the current folder contains a photograph numbered 9999, a new
folder will be created and file numbering will begin again from 0001 regardless of the option
selected.
Reset
As for On, except that file numbering is reset to 0001 with the next photograph taken (if the
current folder already contains photographs, a new folder will be created).
(Displayed When Full Is Selected; A 118)
(Displayed When Full Is Selected; A 118)
(Displayed When Full Is Selected; A 118)
(Displayed When Full Is Selected; A 118)
Firmware version
X.XX
X.XX
Done