Nortel Networks Nortel IP Phone 1220 - Manual (Page 82)

Operating your IP Phone 1220
82
• “Using the Personal Directory” on page 92
• “Using Predial” on page 92
• “Using AutoDial” on page 93
• “Using Ring Again” on page 95
• “Using Last Number Redial” on page 96
• “Using Speed Call” on page 97
• “Using System Speed Call” on page 98
• “Using HotLine” on page 98
• “Using Intercom Calling” on page 99
Using the Callers List
The Callers List logs all incoming calls. The Callers List can store up to
100 entries. When the list is full, the oldest entry is overwritten. Use the
Callers List to review missed calls and make a call if required. The Callers
List contains the following components:
• the caller’s last and first name (if available)
• the DN of the caller
• the time and date of the call
• the number of times the caller called
Callers List entries are sorted on call arrival time.
The format of names in the Callers List depends on the configuration of
Preferred Name Match. The Calling Party Name Display (CPND) appears
according to the configuration settings on your phone if Preferred Name
Match is active on your phone. If Preferred Name Match is off, the CPND
appears according to the system configuration.
To access the Callers List, press the Directory key, and select Callers
List . If password control is enabled, you must enter your SCPW at the
prompt.