Nortel Networks Nortel IP Phone 1220 - Manual (Page 55)

Customizing your IP Phone 1220—basic features
55
Enabling OnHook Default Path
Use OnHook Default Path option to choose either the Headset or the
Handsfree to operate your IP Phone.
Use the following procedure to enable OnHook Default Path.
Changing feature key labels
Use the Change feature key label option to rename the label that
corresponds to the feature key. You can define labels with a maximum of
nine characters. You can also restore the default labels (collectively or
individually).
Note: If a feature key is configured as an autodial key, the label does
not change if the autodial key configuration changes.
1. Press the Services key, select
Telephone Options , and select On
Hook default path.
2. Press the Up or Down keys to select
one of the following:
— Handsfree Enabled
— Headset Enabled
3. Press the Select soft key to save the
default path and return to the Telephone
Options menu.
or
Press the Cancel soft key to cancel the
modifications.
(Services)
or
Cancel Select