Netopia 4541 - Manual (Page 39)

WAN and System Configuration 7-3
■ Enter a name for the circuit in the Circuit Name field.
■ Toggle Circuit Enabled to Yes.
■ Enter the Vir tual Path Identifier and the Vir tual Channel Identifier in the Circuit VPI and Circuit VCI
fields, respectively.
■ Then, select a Connection Profile for the Circuit. To use the Default Profile, select Use Default Profile
for Circuit and press Return. For other options, select a profile from the Use Connection Profile
pop-up menu.
■ Select ADD Circuit NOW and press Return.
7. To display or change a circuit, select Display/Change Circuit, select a cicuit from the pop-up menu, and
press Return. The fields are the same as those in the Add Circuit screen.
8. To delete a circuit, select Delete Circuit, select a cicuit from the pop-up menu, and press Return. In the
confirmation window, select CONTINUE and press Return.
9. Press Escape to return to the WAN Setup menu.
Add Circuit
Circuit Name: Circuit 2
Circuit Enabled: Yes
Circuit VPI (0-255): 0
Circuit VCI (0-65535): 0
Use Connection Profile... Default Profile
Use Default Profile for Circuit
ADD Circuit NOW CANCEL