Niles Audio SI-245 - Manual (Page 7)

14
IN
S
T
A
L
L
A
T
IO
N
AC Power Plug
STEP
Plug the female IEC socket of the
supplied AC cord into the IEC
receptacle on the rear of the amplifier.
Plug the 2 prong plug into a correctly
grounded 120V 60 Hz wall outlet.
CAUTION! Typically the
preamp/receiver’s switched outlet is
not rated for a power amplifier.
DESCRIPTION
Just like a computer or printer, the SI-245
has an AC cord which unplugs either at the
amp or at the wall for your convenience.
If you use a grounded power strip, surge
suppressor or extension cord, verify that
proper ground is maintained.
The SI-245 draws a maximum of approxi-
mately 200 watts from an AC wall outlet.
Use the auto turn on circuit instead.
DS00241BMY-SI-245.qxp 6/7/05 5:02 PM Page 6