Niles Audio SI-245 - Manual (Page 10)

Red “Power” LED confirms the amplifier is
connected to a live AC power outlet. (and
that the master power switch is on). Green “Active” LED lights when the
amplifier circuitry has been turned on by
the Turn-On circuits.
Front panel “Master Power” switch turns
off the entire amplifier, including the
Turn-On circuitry. The red “Protect” LED indicates the amp has shut
down because there is a fault in a speaker, the
wiring, or with the SI-245 itself.
Main Inputs enable you to route a stereo
line level source to the SI-245. Cascade Outputs of the Main Input enable
you to daisy chain multiple amplifiers.
3.5mm Mini Plug socket for
12v DC Control output.
“ Turn-On Mode ” switch
3.5mm Mini Plug socket
for voltage input.
9
F
R
O
N
T
A
N
D
R
E
A
R
P
A
N
E
L
D
E
T
A
IL
S
DS00241BMY-SI-245.qxp 6/7/05 5:02 PM Page 9