Advanced > routing > static route – Netcom NB9 User Manual
Page 58
8
NB9/NB9W ADSL+ VoIP Router
YML790 Rev8
Advanced > Routing > Static Route
Static routing allows computers that are connected to the NB9/NB9W to communicate with computers on
another LAN segment which are connected to the NB9/NB9W via another router. See diagram below for
example setup:
To set a static route, click add and enter the relevant details in the fields e.g. 192.168.1.2
Field
Entry
Destination Network
Address
LAN IP of destination address
Subnet Mask
Enter Subnet Mask for same
Use Gateway IP Address
Remote router gateway address
This manual is related to the following products: