Netcom NB9 User Manual
Page 15
NB9/NB9W ADSL+ VoIP Router
1
YML790 Rev8
3. Establishing your Wireless Connection (for NB9W only)
Wireless networking provides an alternative connection to using Ethernet cable. Wireless access is enabled
by default on your NB9W with the following default settings:
•
Wireless network name (SSID):
‘wireless’;
•
Security: WEP (64-bit) HEX key:
‘a1b2c3d4e5’;
Note: For advanced wireless settings of your NB9W refer to the User Guide included on your NB9/NB9W CD ROM.
If you have a wireless Ethernet card on your PC, you can connect to your NB9W by following these steps:
1.
Connect the NB9W as in the diagram on page 9;
2.
Enable the wireless connectivity of your PC;
3.
Search for available wireless networks;
4.
The default name (SSID) of the NB9W’s wireless network, ‘wireless’, will appear;
5.
Connect to the SSID ‘wireless’ and when prompted, enter the default HEX password which is A1B2C3D4E5;
6.
Proceed with ‘Establishing an ADSL connection via PPPoE’ above.