Pitney Bowes SV62214 - Manual (Page 41)

3-10
3 • Running Mail
SV62214 Rev. A
Clearing the Batch Count
1. Press Funds .
2. Press Page Down and select "Clear batch values".
3. At the "Confirm Clear" prompt, press Yes/Enter to confirm. The
batch value and batch piece registers return to zero
4. Press Home to return to the Home screen.
IMPORTANT: Make sure you really want to clear the batch count;
once you do, you can't re store the data.
Printing the Batch Count
1. Press Funds .
2. Press Page Down twice and select "Print Funds Report".
3. At the "Please insert envelope or tape sheet to print report"
prompt, place the envelope/tape sheet up against the back wall of
the sys tem and slide it to the right until the sys tem grasps it. The
Funds Reports is printed and the envelope/tape strip is ejected.
Used: $464 . 270
Available: $000 . 000
Total Pieces: 735
Control Sum: $464 . 270
Batch Count: 733
Batch Value: $464 . 270
PBP Serial No.: 0011969
J A N 0 7 0 8
9 : 5 5 P
Funds Report
Used – the total of all postage ever used in the meter
Available – the amount of postage left in the meter
Total Pieces – the total number of mail pieces run through the
meter that had postage applied
Control Sum – the total of all postage refills for the meter. It equals
the amount Used plus Available funds. This is a postal requirement
that verifies an accurate accounting of postage in your machine.
Batch Count – the number of mail pieces that had postage ap-
plied since the last time the batch count was cleared
Batch Value – the amount of postage applied since the last time
the batch value was cleared
PBP Serial No. – serial number of this meter (normally meter
number)
4. Press Home to return to the Home screen.