Display problems (display hard to read), Feeding problems (stalled envelopes), 11 • troubleshooting – Pitney Bowes SV62214 User Manual
Page 137
11-2
11 • Troubleshooting
SV62214 Rev. A
Feeding Problems (stalled envelopes)
1. Move transport release lever 1/4 turn to the right (clockwise) to
the "released" position (vertical).
2. Carefully pull envelope out from right.
i
NOTE:
To avoid stalled (jammed) envelopes:
•
Make sure your envelopes meet our published spec i fi c-
a tions. See Chapter 1, Introduction.
•
Feed envelopes correctly. See the instructions in Chapter 3,
Running Mail
. Don't try to feed oversize envelopes through
the machine. Use tape strips instead.
3. Make sure deck is clear of pa per frag ments.
4. Move transport release lever 1/4 turn to the left (counter-clock-
wise) back to the "home" position (horizontal).
Display Problems (display hard to read)
The display contrast needs adjustment.
1. Press
Options
.
2. Select "Adjust the Contrast".
3. Select "Increase Contrast" or "Decrease Contrast" to change the
contrast level as necessary.
4. Press
Home
to return to the Home screen.