Panasonic SX-KN7000 - Manual (Page 103)

MEASURE ERASE
Erase the recorded contents of specific meas-
ures. You can also specify which type of data is
to be erased.
• Note that only the contents of the measures
are erased, not the measures themselves; the
length of the performance remains the same.
1. Use the TRACK
∧
and
∨
buttons to specify
the track number.
• This function does not work for the RHYTHM
part or CHORD part in which a repeat com-
mand has been stored.
• If ALL is selected, data is erased from the
specified measures of all the tracks at one
time.
2. Use the FIRST MEASURE
∧
and
∨
buttons
to specify the start point (measure number).
3. Use the LAST MEASURE
∧
and
∨
buttons to
specify the end point (measure number).
4. Use the ERASE DATA
∧
and
∨
buttons to
specify the type of data to be erased.
ALL:
All data is erased.
NOTE:
Only note data is erased.
CONTROL:
Only control data (volume, effect and other
panel settings as well as selection changes)
is erased.
5. Press the OK button.
• The confirmation display appears. Press the
YES button to execute the function, or press
the NO button to cancel the function.
MEASURE DELETE
Delete specified measures from a track.
• The length of the performance accordingly
decreases by the number of deleted meas-
ures.
1. Use the TRACK
∧
and
∨
buttons to select the
track from which measures are to be deleted.
• This function does not work for the CHORD
or RHYTHM track in which the repeat function
has been stored.
• If ALL is selected, the specified measures are
deleted from all the tracks at one time.
2. Use the FIRST MEASURE
∧
and
∨
buttons,
to specify the first measure to delete.
3. Use the LAST MEASURE
∧
and
∨
buttons to
specify the last measure to delete.
4. Press the OK button.
• The confirmation display appears. Press the
YES button to execute the function, or press
the NO button to cancel the function.
Se
q
u
e
n
c
e
r
Part IV Sequencer
103
QQTG0671