Panasonic AW-RP50N - Manual (Page 9)

9
Selecting the settings for a selected remote camera
  Setting the white balance
The ratio between RGB (three primary colors) is adjusted so
that white will be reproduced accurately.
If the white balance is off, not only will white be reproduced
poorly but the color tone of the entire picture will also
deteriorate.
The white balance must be adjusted when using a remote
camera for the first time or when the remote camera has
not been used for a prolonged period of time. It must also
be adjusted when changes have been made in the lighting
conditions or brightness.
The white balance can be adjusted automatically or
manually (fine adjustment after automatic adjustment).
In addition, preset values or the “auto tracking white
adjustment (ATW)” which continues to adjust the white
balance automatically all the time can be selected.
The results of white balance adjustments can be stored
in memory A or memory B when “AWB A” or “AWB B” has
been selected for the white balance.
Selecting the white balance mode
Follow the steps below to set the white balance mode.
1
Set the MENU button to ON.
Press the MENU button to light its indicator.
2
Set the PRESET MEMORY/MENU 4 button
(AWB/ABB) to ON.
When the button is pressed and its indicator lights, the
[AWB/ABB] menu is displayed on the LCD panel.
3
Turn the F1 dial to select the white balance
mode.
AWB MOD: AWB B
SET : AWB
The modes which can be selected differ depending on the
remote camera connected.
Remote
camera
Mode Remote camera status
AW-HE50
AWB A
The status of the white balance
registered in remote camera
memory A is established.
AWB B
The status of the white balance
registered in remote camera
memory B is established.
ATW
In this mode, the white balance is
automatically adjusted continuously
all the time and automatically
compensated even when the light
source or color temperature has
changed.
AW-HE100
AW-HE870
AW-E860
AW-E750
AW-E650
AW-E350
AWB A
The status of the white balance
registered in remote camera
memory A is established.
AWB B
The status of the white balance
registered in remote camera
memory B is established.
3200K
The status of the white balance
which was adjusted at a brightness
of 3200K is established.
5600K
The status of the white balance
which was adjusted at a brightness
of 5600K is established.
ATW
In this mode, the white balance is
automatically adjusted continuously
all the time and automatically
compensated even when the light
source or color temperature has
changed.
AK-HC1500
AK-HC1800
 