beautypg.com

Sending faxes – Panasonic KX-FP86 User Manual

Page 39

background image

FACE DOWN

STOP

FAX START

JOG DIAL

Display

SET

RESOLUTION

39

Sending Faxes

Sending to pre-programmed parties in the broadcast memory

The same document will be sent to the specific parties whose numbers are stored in broadcast
memory.
The memory capacity is approx. 25 pages based on the ITU-T No. 1 Test Chart in standard
resolution (p. 85).

1

Insert the document FACE DOWN.

If necessary, press
repeatedly to select the desired setting (p. 30).

2

Rotate

until the following is

displayed.

Display:

3

Press .

The document will be fed into the unit and
scanned into memory. The unit will then
transmit the data to each station, calling
each number sequentially.

After transmission, the stored document will
be erased automatically, and the unit will
automatically print a broadcast sending
report (see below).

FAX START

JOG DIAL

RESOLUTION

Note:

If you select the “FINE”, “SUPER FINE” or “HALF
TONE” resolution, the number of pages that the unit
can transmit will decrease.

If one of the stations is busy or does not answer, the
station will be skipped. All skipped stations will be
redialed up to 2 times after all of the other stations
have been called.

To cancel the broadcast setting

1. Press

while the unit displays the

following message.

Display:

The display will show the following.

2. Press .

SET

YES:SET/NO:STOP

SEND CANCELED?

BROADCASTING

STOP

Sample of a broadcast sending report

NO.

01
02
03
04

Mike
Peter
Sam
Kim

USAGE TIME

01'10
01'08
01'09
01'10

004'37

PAGES

02
02
02
02

008

OK
OK
OK
OK

START TIME

Jan. 10 2000 09:36AM

YOUR LOGO :

YOUR FAX NO. :

Jan. 10 09:31AM
Jan. 10 09:33AM
Jan. 10 09:34AM
Jan. 10 09:35AM

TOTAL

RESULT

(IQ-FAX)

OTHER FACSIMILE

(008)

BROADCAST REPORT

Total number of pages sent to
the fax server of the NetMoves
network (p. 33).

The “ ” mark shows the fax has been sent
to the fax server of the NetMoves network
(p. 33).

This manual is related to the following products: