Panasonic DMC-FZ50 User Manual

Page 30

Preparation

VQT0X92

• To reset the folder number to 100, format

(P111) the card first and then use this
function to reset the file number.
A reset screen for the folder number will
then appear. Select [YES] to reset the
folder number.

• Refer to P113 for detailed information

about the file number and the folder
number.

[RESET]

Press [

] to display the [SETUP] menu

and select this item. (P27)
The [REC], [CUST. SET MEM.] or [SETUP]
menu settings are reset to the initial
settings.
• The birthday setting for [BABY1]/[BABY2]

(P69) in scene mode, the number of days
that have passed since the departure date
for [TRAVEL DATE] (P71) and the
[WORLD TIME] setting (P73) are also
reset when the [SETUP] menu settings
are reset. Also, [FAVORITE] (P103) is
fixed to [OFF] and [ROTATE DISP.] (P104)
is fixed to [ON].

• The folder number and the clock setting

are not changed.

[USB MODE]

Press [

] to display the [SETUP] menu

and select this item. (P27)
Select the USB communication system
after or before connecting the camera to
your PC or your printer with the USB
connection cable (supplied).
[

SELECT ON CONNECTION]:

Select either [PC] or [PictBridge (PTP)]
if you connected the camera to a PC or
a printer supporting PictBridge.

[

PC]:

Set after or before connecting to a PC.

[

PictBridge (PTP)]:

Set after or before connecting to a
printer supporting PictBridge.

• When [PC] is selected, the camera is

connected via the “USB Mass Storage”
communication system.

• When [PictBridge (PTP)] is selected, the

camera is connected via the “PTP (Picture
Transfer Protocol)” communication system.

[HIGHLIGHT]

Press [

] to display the [SETUP] menu

and select this item. (P27)
[ON]:

When the auto review or review
function is activated, a white
saturated area appears blinking
in black and white. (P44)

[OFF]:

No highlight display

[VIDEO OUT]

(Playback mode only) (P118)

Press [

] to display the [SETUP] menu

and select this item. (P27)
[NTSC]: Video output is set to NTSC

system.

[PAL]:

Video output is set to PAL
system.

[TV ASPECT]

(Playback mode only)

Press [

] to display the [SETUP] menu

and select this item. (P27)
[

Select this if connecting the camera to a
16:9 TV.

[

Select this if connecting the camera to a
4:3 screen TV.

• This is suitable for displaying pictures

recorded with a [

] aspect on the

full screen of a 16:9 TV. Pictures
recorded with a [

] or [

]

aspect are displayed with black bands
on the left and right of the screen.

• When [

] is selected, pictures

recorded with a [

] or [

]

aspect are displayed with black bands
on the top and bottom of the screen.

• When you select [

] and use the

AV cable (supplied) for output (P118),
pictures are displayed vertically on the
LCD monitor.

SET