Panasonic DMR-E80H - Manual (Page 9)

9
RQT6984
Se
tt
ing up
STEP
5
Set up to match your television
Change the settings if your television is:
≥ Progressive
– Read your television’s operating instructions for details.
≥ Widescreen (16:9 aspect ratio)
1
Press [SETUP] to show the menus.
2
Press [ 3 , 4 ] to select “TV Screen”
and press [ 1 ].
3
Press [ 3 , 4 ] to select “TV Type” and
press [ENTER].
4
Press [ 3 , 4 ] to select the item and
press [ENTER].
≥ If you select a progressive output (480P) item, select Video
in the on-screen menu and set “Transfer” to suit the material
(
➜ page 41).
To return to the previous screen
Press [RETURN].
When you are finished
Press [SETUP].
∫ Regarding Progressive Television Picture
Progressive image aspect (height to width ratio) is set at a standard
16:9. DVD-Video which has been set at 16:9 will be displayed cor-
rectly. However, 4:3 video material will be stretched to the right and
left when displayed.
≥ To view the picture at the right aspect
– For televisions that allow the aspect of progressive images to
be adjusted, use the function provided on the television and
adjust as necessary.
– For televisions which do not allow the aspect of progressive
images to be adjusted, please set “Progressive” to “OFF”
(
➜ page 41).
[Note]
≥ If the unit is connected to the TV through VIDEO OUT or S-
VIDEO OUT, output will be interlace only (even if you select pro-
gressive output).
≥ When progressive output is on, closed captions cannot be dis-
played.
You can control televisions by entering the remote control code.
Press and hold [ Í , POWER TV] and enter the
two-digit code with the numbered buttons.
e.g., 01: press [0] ➜ [1].
Code No. and Manufacturer
≥ Test by turning on the television and changing channels. Repeat
the procedure until you find the code that allows correct operation.
[Note]
If your television brand is not listed or if the code listed for your tele-
vision does not allow control of your television, this remote control
is not compatible with your television.
∫ Operation
Point the remote control at the television.
DVD TV
INPUT SELECT VCR Plus+ OPEN/CLOSE TV/VIDEO
CH
VOLUME
SKIP
DIRECT NAVIGATOR PLAY LIST
TOP MENU
ENTER
MENU
FUNCTIONS RETURN
STOP PAUSE PLAY/x1.3
SLOW/SEARCH
CANCEL
1 2 3
DVD TV
4 5 6
7 8 9
0 100
FRAME CM SKIP TIME SLIP
ERASE REC PROG/CHECK ADD/DLT
DUBBING REC MODE STATUS MARKER
AUDIO SETUP DISPLAY POSITION
MEMORY
POWER
Í , POWER TV
3 , 4 , 2 , 1
ENTER
W , X , CH
TV/VIDEO
DVD, TV
r , s , VOLUME
RETURN
SETUP
HDD DVD
Numbered
buttons
TAB SELECT
Antenna System
Auto Channel Setting
Channel Caption
Preset Channel Caption
Manual Channel Caption
VCR Plus i CH Setting
CATV
Channel
SETUP
RETURN
Set Up
Disc
Video
Audio
Display
TV Screen
TAB SELECT
4:3 TV Settings for DVD-Video
TV mode(4:3)
Letterbox
Pan&Scan
SETUP
RETURN
Set Up
Disc
Video
Audio
Display
TV Screen
4:3 TV Settings for DVD-RAM
TV Type
ENTER
Channel
4:3 (480I)
SETUP
Set Up
Disc
Video
TV Type
Aspect 4:3 & 480I
Aspect 4:3 & 480P Channel
Aspect 16:9 & 480P
Aspect 16:9 & 480I
Television operation
01
Panasonic/National QUASAR
11 JVC
02 12 HITACHI
03
MAGNAVOX SYLVANIA
PHILIPS (RC-5)
13 MITSUBISHI
04 ZENITH 14 SAMSUNG
05 THOMSON RCA GE 15
GOLDSTAR/LG 06
SHARP
16
07 17
08 SONY 18
SAMSUNG
09 TOSHIBA 19
10 SANYO FISHER –
Operation Button
On and off [ Í , POWER TV]
Video input mode [TV/VIDEO]
Channels
(Switch [DVD, TV] to “TV”.)
[
W , X , CH] or
Numbered buttons
e.g., Channel “5”: [0] ➜ [5]
Volume [ r , s , VOLUME]