beautypg.com

Adjusting loudness, Using subwoofer output, 26 customizing preferences – Pioneer 2010 NAVIGATION UPGRADE SD-CARD CNSD-130FM User Manual

Page 128

background image

1

Display the

“Audio Menu” screen.

= For details, refer to Displaying the

“Audio Menu” screen on page 126.

2

Turn MULTI-CONTROL to select

“P.EQ Setting1”.

3

Press MULTI-CONTROL left or right to

select the equalizer band to adjust.
Each time

MULTI-CONTROL is pressed left or

right, the equalization band is selected in the
following order:
Low

— Mid — High

4

Press MULTI-CONTROL up or down to

adjust the level of the equalizer band.
Each time

MULTI-CONTROL is pressed up or

down, the level of the equalization band in-
creases or decreases.

“+6” to “–6” is displayed

as the level is increased or decreased.

5

Turn MULTI-CONTROL to select

“P.EQ Setting2”.

6

Press MULTI-CONTROL left or right to

select the desired frequency.
Press

MULTI-CONTROL left or right until the

desired frequency appears in the display.
Low: 40 Hz

— 80 Hz — 100 Hz — 160 Hz

Mid: 200 Hz

— 500 Hz — 1 kHz — 2 kHz

High: 3 kHz

— 8 kHz — 10 kHz — 12 kHz

7

Press MULTI-CONTROL up or down to

select the desired Q factor.
Press

MULTI-CONTROL up or down until the

desired Q factor appears in the display.
2W

— 1W — 1N — 2N

8

Repeat above adjustments.

If necessary, you can adjust other equalization
bands successively.

Adjusting loudness

Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.

1

Display the

“Audio Menu” screen.

= For details, refer to Displaying the

“Audio Menu” screen on page 126.

2

Turn MULTI-CONTROL to select

“Loud-

ness

”.

3

Press the center of MULTI-CONTROL to

turn loudness on.
Loudness level (e.g.,

Mid) appears in the dis-

play.

p To turn loudness off, press

MULTI-CONTROL again.

4

Press MULTI-CONTROL left or right to

select a desired level.
Each time

MULTI-CONTROL is pressed left or

right, level is selected in the following order:
Low

— Mid — High

Using subwoofer output

The navigation system is equipped with a sub-
woofer output mechanism, which can be
turned on or off.

1

Display the

“Audio Menu” screen.

= For details, refer to Displaying the

“Audio Menu” screen on page 126.

2

Turn MULTI-CONTROL to select

“Sub-

Woofer1

”.

3

Press the center of MULTI-CONTROL to

turn subwoofer output on.

p To turn subwoofer output off, press

MULTI-CONTROL again.

4

Press MULTI-CONTROL left or right to

set the phase of subwoofer output.
Each time

MULTI-CONTROL is pressed left or

right, the phase of subwoofer output is se-
lected in the following order:
Reverse (Reverse phase)

— Normal (Normal

phase)

5

Turn MULTI-CONTROL to select

“Sub-

Woofer2

”.

6

Press MULTI-CONTROL left or right to

select cut-off frequency.
Each time

MULTI-CONTROL is pressed left or

right, frequencies are selected in the following
order:
50 Hz

— 63 Hz — 80 Hz — 100 Hz — 125 Hz

En

128

Chapter

26

Customizing preferences