Panasonic NV-FJ730 User Manual
Page 19
19
Operations
1
Press the Play button
7 to start playback.
2
At the point where you want to join a new scene, press
the Pause/Slow button
J to put it in the still playback
mode.
3
Press the REC button
I to put it in the recording pause
mode.
4
Start playback on the source unit and search for the point
from which you want to record (copy) onto this VCR.
5
When that point is reached, press the Pause/Slow button
J again to start recording the new picture and sound from
the playback unit.
6
To record (copy) additional scenes, press the Pause/Slow
button
J to put this VCR in the recording pause mode
and then perform above steps 4 and 5 again.
7
At the point where you want to stop recording, press the
Stop button
F to finish recording.
Notes:
– If you leave the VCR in the recording pause mode for more
than 5 minutes in step 3 or 6, the VCR automatically
switches over to the stop mode to protect the video heads.
– If [DIRECT REC] is set to [ON], connect with AV2 sockets
and select A2.
To delete all of a cassette’s contents
(Tape Refresh Function)
You can delete all of a cassette’s contents (the picture, the
sound and the Jet Navigator data) all at once.
Operations
1
Be sure to set [JET NAVIGATOR] to [ON] when you want
to delete all contents of a cassette that is recorded while
setting [JET NAVIGATOR] to [ON].
Be sure to set [JET NAVIGATOR] to [OFF] when you want
to delete all contents of a cassette that is recorded while
setting [JET NAVIGATOR] to [OFF] or is recorded on
another VCR. (See page 13.)
2
Insert a cassette that you want to delete the cassette’s
contents.
T A P E R E F R E S H
S T A R T : T A P E R E F R E S H
E N D : S T O P
3
Press TAPE REFRESH button
X for
5 seconds or more to put the VCR in
tape refresh standby mode.
4
Press TAPE REFRESH button
X for 2 seconds or more
to start the tape refresh function.
The tape is rewound to the beginning, and it is fast-forwarded
with the tape refresh function.
When the tape reaches the end, the VCR automatically
rewinds it to the beginning.
Note:
– When a video cassette with a broken off erasure prevention
tab is inserted, this function is not activated.
On Screen Display
T A P E R E F R E S H
5
E N D : S T O P
VCR display