Panasonic AG-TL950 - Manual (Page 36)

36
RESET/
CANCEL
MENU TIME MODE
SHIFT
ON SCREEN
S E T – +
REC
EJECT
REC REVIEW REC
PAUSE/
STILL MENU TIME MODE
SET
ON SCREEN
SHIFT PLAY FF/ REV PLAY TRACKING V. LOCK TIMER SEARCH COUNTER LOCK CNT RESET
RESET / CANCEL
STOP
FWD ADV
POWER
HDR
POWER
AG-
6-3 Timer Recording
6 RECORDING
Canceling/Changing Timer Recording
Program
To stop timer programming before finishing
1 Press the [RESET/CANCEL] button.
[ The program being set is canceled.
2 Press the [MENU] button twice.
[ The normal screen mode is restored.
To cancel preset timer programs
1 Press the [TIMER] button so that the TIMER indication
goes out on the display.
2 Turn on the VCR and monitor.
3 Press the [MENU] button to show the main menu screen
and press the [SHIFT
7 ] button to select
TIMER> or . Then, press the [SET +/–]
button.
[ The or menu
is shown on the monitor.
4 Press the [SHIFT 7 ] button or [SHIFT f ] button to move
the cursor to the program you want to cancel.
5 Press the [RESET/CANCEL] button.
[ The specified timer recording program is canceled.
6 Press the [MENU] button twice.
[ The normal screen is restored.
[TIMER] button [SET –] button
[SHIFT f ] button
[SHIFT 7 ] button
[SET +] button [MENU] button
[RESET/CANCEL] button
To modify timer programs
1 Press the [TIMER] button so that the TIMER indication
goes out on the display.
2 Turn on the VCR and monitor
3 Press the [MENU] button to show the main menu screen
and press the [SHIFT
7 ] button to select
TIMER or . Then, press the [SET +/–]
button.
[ The or menu
is shown on the monitor.
4 Press the [SHIFT 7 ] button or [SHIFT f ] button so that
the section you want to change blinks.
5 Press the [SET +/–] button to change the value.
6 Press the [MENU] button twice.
[ The normal screen is restored.
To use the VCR when the Timer-Recording
Standby mode is engaged
• Press the [TIMER] button so that the TIMER indication
goes out. After using the VCR, press the [TIMER] button
again to engage the Timer-Recording Standby mode. The
TIMER indication will light.
• When all timer recording programs are completed, the
TIMER indication goes out.