Pioneer 915 - Manual (Page 57)

Controlling the rest of your system 10
57
En
English
Français
Deutsch
Nederlands
Italiano
Español
Certain buttons represent operations that
cannot be learned from other remote controls.
The buttons available are shown below:
6 To program additional signals for the
current component repeat steps 4 and 5.
To program signals for another component,
exit and repeat steps 1 through 5.
7 Press the RECEIVER button to exit and
store the operation(s).
Erasing one of the remote
control button settings
VSX-915 model only
This erases one of the buttons you have
programmed and restores the button to the
factory default.
1 While pressing the RECEIVER button,
press and hold the 1 button.
The remote LCD display shows SETUP .
2 Press the MULTI CONTROL button
corresponding to the button setting to be
erased.
The LCD on the remote displays the
component.
3 Use / (cursor left/right) to select
ERASE then press ENTER .
The LCD display flashes PRES KEY .
4 Press and hold the button to be erased for
two seconds.
The LCD display shows OK or NO CODE to
confirm the button has been erased.
5 Repeat step 4 to erase other buttons.
6 Press the RECEIVER button when you’re
done.
Erasing all of the remote control
presets
This will erase all preset remote control preset
codes and (VSX-915 model only) programmed
buttons.
1 While pressing the RECEIVER button,
press and hold the 1 button.
The remote LCD display shows SETUP .
2 Press the DVD/LD MULTI CONTROL
button.
3 Use / (cursor left/right) to select
RESET then press and hold ENTER for about
two seconds .
The LCD shows OK to confirm the remote
presets have been erased.
Direct function
• Default setting: ON
You can use the direct function feature to
control one component using the remote
control while at the same time, using your
receiver to playback a different component.
This could let you, for example, use the remote
control to set up and listen to a CD on the
receiver and then use the remote control to
rewind a tape in your VCR while you continue
to listen to your CD player.
+10
FL DIMMER SR
DISC
RECEIVER
MULTI CONTROL
SOURCE INPUT
SELECT
ENTER
DVD/LD TV/SAT DVR/VCR TV CONT
CD
ST ST
CD-R/TAPE TUNER RECEIVER
ENTER
D.ACCESS
TOP MENU
DTV MENU
CLASS
MENU
BAND
RETURN GUIDE
T.EDIT
SYSTEM
SETUP
TUNE
TUNE
TV CONTROL
RECEIVER CONTROL
SHIFT
VOL
THX
SLEEP DIALOG E
AUTO SURR
STANDARD ADV.SURR STEREO
INPUT
SELECT TV CH
DTV ON/OFF
TUNER
DISPLAY
MPX
AUDIO
CH RETURN
SUBTITLE
MIDNIGHT/
LOUDNESS
SIGNAL
SELECT
EFFECT
/CH SEL
ACOUSTIC
EQ
DTV INFO REC MUTE
TV VOL
REC STOP
HDD
CH CH
DVD
RETURN GUIDE
RECEIVER
VSX_815-915.book.fm 57 ページ ２００４年１２月８日 水曜日 午後４時３分