P97) – Panasonic DMC-TS4 User Manual
Page 97
- 97 -
Recording
You can finely adjust the White Balance when you cannot acquire the desired hue by
setting the White Balance.
•
Fine adjustment is possible only when the White Balance is set to [V]/[Р]/[о]/[С]/[Т].
1
Select the White Balance to finely adjust and then press [DISP.] to display
[WB Adjust.].
2
Press
2
/
1
to adjust the White Balance.
•
Select [0] to return to the original White Balance.
3
Press [MENU/SET] to finish.
Note
•
The White Balance icon on the screen turns red or blue.
•
The White Balance fine adjustment setting is reflected in the picture when using the flash.
•
You can finely adjust the White Balance independently for each White Balance item.
•
The White Balance fine adjustment setting is memorized even if the camera is turned off.
•
The White Balance fine adjustment level in [Ò] returns to [0] when you reset the White
Balance using [Ó].
•
In the [Beach & Snorkeling] or [Underwater] Mode, the White Balance is fixed at [AWB], but it
can be finely adjusted.
•
White Balance fine adjustment cannot be set for [B&W] and [SEPIA] in [Color Mode].
Finely adjusting the White Balance
2 [Red]:
Press when the hue is bluish.
1 [Blue]:
Press when the hue is reddish.