Pioneer DVH-P4100UB - Manual (Page 49)

! Fader/balance setting (refer to Using bal-
ance adjustment on page 53)
! SLA (source level adjustment) setting (refer
to Adjusting source levels on page 55)
! Dynamic range control (refer to Using the
dynamic range control on page 55)
! Direct control setting (refer to Using the di-
rect control on page 55)
! Down-mix setting (refer to Using the down-
mix function on page 55)
1 Use MULTI-CONTROL to select RESET in
the initial setting menu.
Refer to Adjusting initial settings on page 45.
2 Press MULTI-CONTROL to display YES/
NO selection.
# Press DISP/BACK/SCRL to return to the pre-
vious display.
3 Turn MULTI-CONTROL to display YES.
4 Press MULTI-CONTROL to display
REALLY?.
# Press DISP/BACK/SCRL to return to the pre-
vious display.
5 Press MULTI-CONTROL to reset audio
functions.
COMPLETE appears in the display.
Other Functions
Using the AUX source
Up to two auxiliary devices such as VCR or
portable devices (sold separately) can be con-
nected to this unit. When connected, auxiliary
devices are automatically read as AUX sources
and assigned to
AUX1 or AUX2. The relation-
ship between AUX1 and AUX2 sources is ex-
plained below.
About AUX1 and AUX2
There are two methods to connect auxiliary de-
vices to this unit.
AUX1 source:
When connecting auxiliary device using the
front AUX input
! You need setting in the initial setting menu.
Refer to Switching the auxiliary setting on
page 45.
! If an iPod with video capabilities is con-
nected to this unit via 3.5 mm plug (4 pole)
cable (e.g., CD-V150M), you can enjoy the
video contents of the iPod.
! It is possible to connect a portable audio/
video player by using a 3.5 mm plug (4
pole) to RCA cable, which is sold sepa-
rately. However, depending on the cable, re-
verse connection between red (right side
audio) cable and yellow (video) cable is re-
quired. Otherwise, audio and video may not
be correctly reproduced.
% Insert the mini plug into the AUX input
jack on this unit.
For more details, refer to Head unit on page 9.
This auxiliary device is automatically set to
AUX1.
AUX2 source:
When connecting auxiliary device using the rear
RCA input
! You need setting in the initial setting menu.
Refer to Switching the auxiliary setting on
page 45.
Operating this unit
En
49
Section
02
Operating
this
unit