Panasonic KXTH111 - Manual (Page 61)

Using a Cellular Phone with this Unit
For assistance, please visit http://www.panasonic.com/phonehelp 61
4
To complete the transfer, press {SP-
PHONE}.
Note for handset and base unit:
L If the paged party does not answer
within 1 minute after you hang up, your
extension rings and the call is returned
to your phone. You can speak to the
caller again by pressing {C} on the
handset or the CELLULAR SELECT
button ({1} to {5}) that is flashing on the
base unit.
L
To transfer a cellular call to the
answering system, see page 33.
Answering a transferred cellular
call
Y ^
Press {C} to answer the page.
L After the paging party hangs up the call,
you can take the transferred call.
Press {SP-PHONE} to answer the page.
L After the paging party hangs up the call,
you can take the transferred call.
Note for handset and base unit:
L If the paging party hangs up before you
answer the page, “Incoming call” is
displayed. Press {C} on the handset or
the CELLULAR SELECT button ({1} to
{
5}) that is flashing on the base unit to
take the transferred call.
Switching a cellular call
between a cellular phone and
the base unit ^
From a cellular phone to the base unit
If you answer a cellular call using a cellular
phone, you can transfer it to the base unit.
1
During a cellular call using your cellular
phone, press the CELLULAR SELECT
button ({1} to {5}) that is in use.
2
“Transfer to base” i {SET}
3
Follow the instructions of your cellular
phone, if required.
L
You may need to enter the PIN (page
42).
From the base unit to a cellular phone
If you answer a cellular call using the base
unit, you can transfer it to the cellular
phone that the call came in.
1
During a cellular call using the base
unit, press the CELLULAR SELECT
button ({1} to {5}) that is in use.
2
“Transfer to Cell” i {SET}
Handset
Base unit
TH111(e).book Page 61 Thursday, June 8, 2006 10:35 AM