Panasonic KX-PX2M - Manual (Page 21)

Printing
21
You can print images stored on SD Memory Card or MultiMediaCard.
Do not change the paper size during operations. Otherwise, printing will be
impossible.
Performing the procedures in "Preparation"
( p. 12 – 18)
Inserting a memory card
This printer supports SD Memory Card, SDHC Memory Card, MultiMediaCard, and
miniSD Memory Card (adaptor required). SD Memory Card, SDHC Memory Card,
MultiMediaCard, miniSD Memory Card, and miniSD Memory Card adaptor are not
provided with the printer.
Printing with the LCD Monitor
Insert the memory card.
Insert the memory
card with the
labelled surface
facing upward.
SD Memory Card
SDHC Memory Card
MultiMediaCard
miniSD Memory Card
adaptor
miniSD Memory Card
First insert the miniSD Memory Card into the card
adaptor. Then insert the card adaptor into the
memory card slot.
Important
• Push the memory card all the way in until it clicks into place.
• Do not remove the memory card when displaying images stored on the memory card on the
LCD monitor.
• To print from a PictBridge compatible device, such as a digital camera, connected directly to
the printer, insert the memory card into the device.
Note
• This printer may not operate with some SD Memory Cards or SDHC Memory Cards. For
example, SD Memory Cards with more than 2 GB in memory are not supported.
• Image formats that can be displayed/printed
This printer is able to display and print JPEG and TIFF format images. However, there are
cases when these format images cannot be displayed or printed. No image will be displayed
in this case. For details, refer to “Specifications” on page 70.
Memory
card slot
• To remove the card, push the card in and release.
Printer
Continued on next page