Lexicon RV-8 - Manual (Page 30)

Basic Operation Lexicon
2-18
COMMAND MATRIX
The command matrix describes the commands that the remote control buttons perform
when each command bank is active.
BUTTON HOME MAIN PAGE1 MAIN PAGE2 ZONE2 PAGE1 ZONE2 PAGE2
1 Enters RV-8 standby mode.
2 Activates the RV-8.
3 Displays the MAIN Zone
command bank, which
includes commands
that control the Main
Zone. Displays the
Main Zone
Status. Selects the Dolby
Digital listening
mode family. Displays the Zone 2
Status. Toggles RV8 between
5 speaker and 7
speaker modes.
4 Displays the Zone 2
command bank, which
includes commands that
control Zone 2. Deactivates the
Main Zone. Selects the DTS
listening mode
family. Deactivates Zone 2. Adjusts the AUDIO
CONTROLS menu
Main Zone BALANCE
to the left.
5 Displays the Zone 3
command bank, which
includes commands that
control Zone 3. Selects the Tuner
input for the
Main Zone. Selects the THX
listening mode
family. Selects the Tuner
input for Zone 2. Sets the Main Zone
Volume level to
-15dB.
6 Displays the DVD1
command bank, which
includes commands that
control DVD1. Selects the
DVD1 input for
the Main Zone. Toggles between
the current
listening mode
and the 2-
CHANNEL
listening mode. Selects the DVD1
input for Zone 2. Shows status menu
for current Main Zone
input stream.
STAT2 button: see
page 2-29 for more
information.
7 Displays the DVD2
command bank, which
includes commands that
control DVD2. Selects the
DVD2 input for
the Main Zone. Analog Bypass
Toggle. Selects the DVD1
input for Zone 2. Activates the RV-8.
8 Displays the SAT
command bank, which
includes commands that
control the Satellite box. Selects the SAT
input for the
Main Zone. Selects the L7 FILM
listening mode. Selects the
Satellite input for
Zone 2. Reserved for future
expansion.
2 1
3
4
5
6
7
8