Life Fitness 95Si User Manual
Page 7
15
4
12
K
3
5
10
D
5
11
9
L
20
K
7. Locate one of the VERTICAL HANDRAILS (#12). Carefully
insert the top of the VERTICAL HANDRAIL into the user right
end of the HANDLEBAR ASSEMBLY (#15). Align the mounting
holes. Secure the VERTICAL HANDRAIL to the HANDLEBAR
ASSEMBLY using two MOUNTING SCREWS (#4). Position the
bottom of the VERTICAL HANDRAIL over the mounting hole in
the top of the right FRAME LEG (K). Using one HEX HEAD
BOLT (#3), mount the VERTICAL HANDRAIL to the right
FRAME LEG as shown. Tighten the BOLT securely. Repeat the
procedure for the remaining VERTICAL HANDRAIL (#12) on the
left side of the HANDLEBAR ASSEMBLY and FRAME.
8. Lift the MONOCOLUMN SHROUD (A) and tighten the
MONOCOLUMN BOLTS (#1) securely.
CAUTION: DO NOT OVER-TIGHTEN THE BOLTS (#1).
MISE EN GARDE : NE SERREZ PAS TROP
LES BOULONS (Nº 1.)
9. Using four MOUNTING SCREWS (#5), attach the ACCESSORY
TRAY (#11) to the DISPLAY CONSOLE (#9) as shown.
CAUTION: DO NOT OVER-TIGHTEN THE SCREWS (#5).
MISE EN GARDE : NE SERREZ PAS TROP
LES VIS (Nº 5).
10. Attach all CABLES (L) leading from the DISPLAY CONSOLE
MOUNTING BRACKET (D) ACCESS HOLE to the back of the
DISPLAY CONSOLE (#9).
11. Feed any excess cable into the MONOCOLUMN (#10). Using
four MOUNTING SCREWS (#5), secure the DISPLAY
CONSOLE (#9) to the DISPLAY CONSOLE MOUNTING
BRACKET (D).
CAUTION: DO NOT OVER-TIGHTEN THE PHILLIPS HEAD
PAN SCREWS (#5).
CAUTION: BE CAREFUL NOT TO PINCH THE WIRE
HARNESS (E) WHEN ASSEMBLING THE CONSOLE
ASSEMBLY (#9) TO THE DISPLAY CONSOLE MOUNTING
BRACKET (D).
MISE EN GARDE : NE SERREZ PAS TROP LES VIS
CRUCIFORMES À TÊTE CYLINDRIQUE (Nº 5).
MISE EN GARDE : VEILLEZ À NE PAS PINCER LE FAISCEAU
DE CÂBLES (E) LORS DU MONTAGE DE LA CONSOLE (Nº 9)
SUR SON SUPPORT (D).
12. Secure the MONOCOLUMN SHROUD (#21) to the MAIN
SHROUD using four MOUNTING SCREWS (#7).
CAUTION: DO NOT OVER-TIGHTEN THE PHILLIPS HEAD
PAN SCREWS (#7).
MISE EN GARDE : NE SERREZ PAS TROP LES VIS
CRUCIFORMES À TÊTE CYLINDRIQUE (Nº 7).
13. Insert the FRAME CAPS (#20) into the ends of the FRAME
LEGS (K).