Life Fitness 95Si User Manual

Page 5

1. Before proceeding, familiarize yourself with the parts of the

Stairclimber and make sure that you have received all the items
described in the Parts List.

2. Locate the MONOCOLUMN (#10). Position the MONOCOLUMN

SHROUD (#21) onto the MONOCOLUMN as shown. Position
the MONOCOLUMN near the MONOCOLUMN MOUNTING
BRACKET (B) as shown. Detach and feed the CONSOLE WIRE
HARNESS (C) through the MONOCOLUMN and out through the
DISPLAY CONSOLE MOUNTING BRACKET (D) ACCESS
HOLE. Pivot the MONOCOLUMN upright and position the
locating slot at the bottom of the MONOCOLUMN onto the pre-
installed LOCATING BOLT (E) on the MONOCOLUMN
MOUNTING BRACKET. Align the mounting holes of the
MONOCOLUMN and MONOCOLUMN MOUNTING BRACKET
and secure them together using two MOUNTING BOLTS (#1)
and LOCKNUTS (#2). Leave the BOLTS and NUTS loose at this
time. Lower the MONOCOLUMN SHROUD until it rests on the
MAIN SHROUDS.

CAUTION: BE CAREFUL NOT TO PINCH THE
WIRE HARNESS (C).

MISE EN GARDE : VEILLEZ À NE PAS PINCER
LE FAISCEAU (C).

3. Align and insert the HANDLEBAR ASSEMBLY (#15) into THE

HANDLEBAR BRACKET TUBE (F) as shown until the mounting
holes in the HANDLEBAR ASSEMBLY align with those of the
HANDLEBAR BRACKET TUBE.