This section provides quick setup instructions for the experienced
computer user with prior host adapter installation and SCSI bus setup
experience. If you prefer more detailed guidance in installing the
SYM22801 host adapter, please follow the instructions in Section 2.2,
“Detailed Installation Procedure.”

For safe and proper installation, check the user’s manual supplied with
your computer and perform the following steps.

Step 1.

Ground yourself before removing this host adapter board.
Remove the SYM22801 Dual Channel to PCI Ultra SCSI Host
Adapter board from the packing and check that it is not
damaged. An example of this host adapter board is shown in
Figure 2.1.

Step 2.

Switch off and unplug the system.

Step 3.

Remove the cabinet cover on your computer to access the PCI
slots. Refer to the user’s manual for your computer.