LaCie 319 - Manual (Page 18)

3.1 Controls
page 18
LaCie 319 LCD Monitor
User’s Manual
Color Control Systems
These options provide manual access to certain settings that influence the colorimetric behavior of your display. If you are per-
forming color-critical work, LaCie recommends that you not manually modify the settings of these functions, as your LaCie
blue eye pro calibration software takes care of this precisely and automatically in accordance to your desired color settings.
Modifying any of these settings manually would significantly disturb the accuracy of the colors you display and undermine the
benefits of your color-managed environment.
Color Control Systems: Seven color presets select the desired color setting (sRGB, NATIVE and PROGRAMMABLE
color presets are standard and cannot be changed). Color temperature increases or decreases, in each preset. Please do not
modify manually if you are performing color-critical work.
R,Y,G,C,B,M,S: Increases or decreases Red, Yellow, Green, Cyan, Blue, Magenta and Saturation depending upon
which is selected. The change in color will appear on screen and the direction (increase or decrease) will be shown
by the color bars. Please do not modify manually if you are performing color-critical work.
NATIVE:
Original color presented by the LCD panel that is unadjustable.
PROGRAMMABLE : This mode is automatically activated by the LaCie blue eye pro calibration software to perform hardware
calibration of the display.
NOTE:
To reset a poor image setting, turn on the monitor by using front power button while holding “EXIT” and “SELECT”
buttons at the same time.
Tools 1
SHARPNESS: This function is digitally capable to keep crisp image at any timings. It is continuously adjustable to get
distinct image or soft one as you prefer, and set independently by different timings.
EXPANSION MODE: Sets the zoom method.
FULL: The image is expanded to 1280 x 1024, regardless of the resolution.
ASPECT: The image is expanded without changing the aspect ratio.
OFF: The image is not expanded.
CUSTOM1: Zoom with center fixed. The image is expanded from the rate of 1.00 to 3.00 times individually for
horizontal (H. EXPANSION) and vertical (V. EXPANSION) direction by 0.01 step.
CUSTOM2:
Zoom with top left corner fixed. The image is expanded from the rate of 1.00 to 3.00 times
individually for horizontal (H. EXPANSION) and vertical (V. EXPANSION) direction by 0.01 step.