LaCie 319 User Manual

Page 13

Text mode
Original mode

2. Quick Start

page 13

LaCie 319 LCD Monitor

User’s Manual

using the front button. DO NOT switch on/off repeatedly.
NOTE:

For the MAC with digital output: Before turning on the MAC, the DVI Input mode must be set to DIGITAL in

“DVI SELECTION” of OSM by pressing “SELECT” button then “CONTROL” button when the DVI signal cable is
connected to the DVI-I connector (Input1) of the monitor. Otherwise the MAC may not turn on.

6. Turn on the computer. No-touch Auto Adjust automatically adjusts the monitor to optimal settings upon initial setup for

most timings. For further adjustments, use the following OSM controls:
• Auto Contrast (Analog input only)
• Auto Adjust (Analog input only)
Refer to the Controls section of this User’s Manual for a full description of these OSM controls.
NOTE:

If you have any problems, please refer to the Troubleshooting section of this User’s Manual.