La Crosse Technology Radio Controlled Projection Alarm WT-5600 User Manual
Page 4
4
QUICK SET-UP GUIDE
1) Insert two AA batteries into the Projection alarm and/or plug into wall
2) Wait 10 minutes for WWVB reception.
3) If there is no WWVB reception, manually set the time and date (instructions
in the Program Mode).
4) Program the settings.
5) Mount the WT-5600 in a suitable location, where WWVB signal can be
received.
6) The projector will activate and remain on if the alarm clock is plugged in. If
only batteries are used, the projector will only be activated when a button is
pressed.
7) See the “Features” section for instructions on projection direction, etc.
See also other documents in the category La Crosse Technology Clock:
- WT-3128 (2 pages)
- WT-5120 433 (15 pages)
- WT-2165 (20 pages)
- WS-8053U (11 pages)
- WT-3131A (7 pages)
- WS-8157U-IT (8 pages)
- WT-5360U (13 pages)
- WT-5360U (16 pages)
- WT-941 (2 pages)
- WT-3143H (2 pages)
- WS-8007U (12 pages)
- WS-8011UM (14 pages)
- WS-8056U (16 pages)
- Wireless 433 MHz Temperature Station WS-9014U (27 pages)
- Wireless 433 MHz Temperature Station WS-9014U (25 pages)
- Wireless 433 MHz Temperature Station WS-9014U (40 pages)
- Wireless 433 MHz Temperature Station WS-9014U (45 pages)
- WT-967 (2 pages)
- WS-8418U-IT (4 pages)
- WT-137 (37 pages)
- WT-137 (27 pages)
- WT-137 (38 pages)
- WT-137 (23 pages)
- WT-137 (12 pages)
- WT-137 (20 pages)
- Wireless 433 MHz Weather Station WS-9032U (9 pages)
- WS-8158U-IT (5 pages)
- WT-2191A (18 pages)
- WS-7075U (23 pages)
- WT-5360 (1 page)
- WS-8117U-IT (5 pages)
- WT-8029U (9 pages)
- WS-8055U (12 pages)
- WT-3126H (2 pages)
- World Time Center WS-7092U (7 pages)
- World Time Center WS-7092U (6 pages)
- WS-6002U (15 pages)
- WS-6003U (11 pages)
- WS-811561 (12 pages)
- WT-2192 (7 pages)
- WT-9300 (3 pages)
- EH-21G (3 pages)
- WT-5432 (20 pages)
- WT-5442 (17 pages)