La Crosse Technology Radio Controlled Projection Alarm WT-5600 User Manual

Page 11

Alarm is Active

2. ACTIVATING/DEACTIVATING THE ALARM

a. After entering the alarm-setting mode, the alarm is activated.
b. To toggle between activating

and deactivating the alarm,
press the “AL” button briefly.
“(((

•)))” will be displayed to

the left of the time display
when the alarm is activated.

c. When the snooze bar is

pressed, the display will show
the time the alarm is set to
below the time display.

3. TURNING ALARM OFF (WHILE SOUNDING)

Note: The alarm will sound for 23 seconds and then increase in volume and
speed for another 62 seconds (85 seconds total). If no button is pushed it
will shut off and be active for the next day.
a. While the alarm is sounding, press the “SNOOZE” bar to disable the

alarm for six minutes.

b. After the “SNOOZE” bar is pressed, the alarm icon will flash in the

lower left area of the display.

c. To disable the alarm for 24 hours, press any button other than

“SNOOZE” or projection keys.